Illustration 1:Measure individual cell voltage for 2 to 8S lithium packs.(Align balance plug)
Illustration 2:When discharging the battery, you can connect the tester to the battery balancing plug for monitoring the cell voltages are average.
Illustration 3: Including Pitch 2.0mm TP 2~8S balance adapter.
Illustration 4:Servo diagnostic feature.
Illustration 5:Receiver signal output detector.
Illustration 6:This device can use to control ESC and measure the propeller RPM.
1.With 3A BEC Output 2.For RC model electrical equipment diagnostic and measurement use. 3.High precision display of individual cell voltage for 2 to 8S lithium packs.In addition to individual cell voltage, it also displays total pack voltage as well as percentage of pack's remaining capacity. 4.Displays serial cell count in a pack, as well as highest and lowest cell voltage, and the voltage difference. 5.Servo diagnostic feature. Displays BEC output voltage and receiver signal output. 6.Digital tachometer to display 2 to 7 propeller rotating speed as well as memory for highest RPM attained. 7.Reverse polarity protection for cell input.
●Voltage measurement range: 2-8S Lipo/Li-ion. ●Voltage display resolution: 0.001V ●PPM manual signal output 2270us-770us ●PPM automatic signal output: 1520us ±(120-630us) ●Number of propeller measurable: 2 to 7 ●Propeller rotating range: 1-60000RPM, measurement distance: 5-15cm ●BEC input voltage range: 4-7v ●With 3A BEC Output ●Battery input terminal spec: 2.5mm pitch pins, compatible with Align compatible balancing plugs.
●Balance adapter D x 1 (Compatible with TP balance plug of same specification)