Without the right tools, adding wire to a Capacitor can be annoying... WaFL's Cap Cap is the perfect solution to keep your mounting options open and to make the connection point on the cap as clean as possible!
WaFL’s Cap Cap (Set of 5)
Are you tired of trying to solder wires on those pesky little capacitor leads? Step your builds up a notch with WaFL’s Cap Cap. This tiny PCB sits on the bottom of most standard “LOW ESR” capacitors, and provides you with two easily accessible pads for quick and clean soldering to the capacitor. Whether you need to quickly swap a broken capacitor after a hard crash, or simply don’t have enough room near your battery pads for your cap to cleanly rest, the Cap Cap makes attaching a wire to your capacitor simple, letting you mount it anywhere on your frame. Comes in a set of 5!
Example pictures show one unit attached to a Panasonic 1000uf 25v Capacitor, and 18 AWG Silicone wire. Capacitor and wires are not included. EDA by Olaf Hichwa.
0.24g (+/- 10%) per unit, 1.2g per set of 5 units (+/- 10%) (not including plastic bag)
Each unit is 10mm in Diameter (+/- 10%), and 1.6mm thick (+/- 10%)