Anakin HD 800TVL Replacement Camera - SkyHero Anakin
Mounting / Installation Note:
Please note that this SkyHero camera ships with (2) mounting locations via the camera board. With the Anakin, this stock camera will not fit without a slight modification, which requires trimming off the outer mounting holes of this camera. This can be accomplished with a Dremel too or sharp pair of diaganol cutters.
Per the below image, trim the outer mounting area (outside of the red lines), staying clear to not cut past the noted red lines. Once cut, the inner mounting holes can be used to mount the camera, and the camera will install without issue.
When cutting the outer ring, please be mindful of the electronics upon the circuit board as to not damage them when the trim is made.