-This outrunner motor is mainly designed for Blade 130X or similar size heli, running with 7.4V Lipo batteries.
-We recommend to use 11T pinion gear.
|Motor Kv:||8000 RPM / Volt (KV)|
|No-Load Current (Io):||0.9 Amps @ 7.4V|
|Max Continuous Current:||7.5 Amps|
|Shaft Diameter:||1.5 mm|
|Shaft Length::||8 mm|
|Distance Between Holes||8.5mm , M1.4 screw|
|Max Lipo Cell:||2 Cell (7.4V)|
** For maximum life, please ensure that the bearings are maintained properly; put a small drop of bearing oil on each bearing every 5 flights. And please make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding and causing over load to the motor.