Lynx FPV Innovations one more time introduce something special.
65 mm micro quads must be light.. Must be ultralight… Must be… But is hard to combine mechanical strength, crash resistance and keep the full frame, including FPV Camera Mount and Roll Bar Antenna Protector under 4.7g.
Lynx FPV Innovations invest over tree month in this project. We start looking and testing all the actual available options.. Standards and upgrades, but no one for our design, production standards and FPV Race in-mind need give us the full happiness feeling.
..the challenge was taken.
Luca Invernizzi starts work with design team, different pilots and plastic consultant. His idea to made a ultra-lightweight 65mm FPV Racer frame based to 3D printing process.
Plastics consultant give the support in order to choose the right material compound for each part of the frame.
Designers fighting with weight and Luca request.
December 2016 we believe is a date to remember.
From our 3D Print Farm finally available the Spider 65 FPV Racer, 3.86g frame weight – 4.7g including FPV Camera Mount.
Lynx FPV Innovations - Spider 65 FPV frame combine feature design:
- Ultra-Lightweight - 3.86g frame weight – 4.7g including FPV Camera Mount.
- Mechanical strength, not require extra stiffeners
- Aerodynamic performance, low profile with Props Duct Funnel Effect
- Impact resistance components, exotics plastics with exclusive extra after-printing chemical treatment that solidify parts and increase elastomer effect.
- Quick assembly without screw and quick service of any frame parts, frame not require screw, all parts Snap-in and frame can be assembled or serviced in one minutes.. or less.
- Over twelve colors available, amazing offer of colors for any taste and feeling, possibility to update colors parts in few second thanks spare parts availability.
- Safety with Props Shroud.
- Wide range FC options, frames was designer over the most commune and actual FC Board.
- Fly Precision, frame offer resonance and vibe suppression effect that stabilize and improve fly precision..
- Incredible price / performance ratio, with less than 20usd (frame only) give extreme performance and good feeling.
- V2 available, after the first month we improve daily the specification and the design of our Spider 65, in cooperation with hard tester and material filament producer, we increase the crash resistance adding elastomer compound on the PETG filament and with new mechanical design feature.
What you need to fly Spider 65:
- 4 x Brushed Motor 6x15mm 17500 – 19000 KV suggested.
- 2 x CCW + 2 CW 31 mm Propeller (Inductrix / Tiny Woop style).
- Fly Controller Compatible: Inductrix FC .
- Bee Brain V1 and V2 – AchroWhoop V1 and V2.
- 1s Lipo Battery 200/250Ah 20/40C discharge
- For Fpv any micro camera FX979 or similar.
Spider Frame Building Material:
Nylon - PETG - TPU depending of the parts
1 x Spider 65 FPV Frame – Solid Red Shroud - Black Frame
Download User Manual for more information about products.
For more information need or service assistance, contact us by website chat service or by e-mail at email@example.com or firstname.lastname@example.org.