Top plate and FPV plates are now 2mm thick. The added total weight is just 7 grams from the original 1.5mm top and pod plates. The new FPV pod plates are 5mm taller to give more space clearance to the HS1177 Camera.
Compatibility with Version 1
The rest of the parts are the same with v1 except the new thicker top plate and the FPV pod plates.
What are included:
2mm unibody carbon fiber bottom plate x 1 2mm unibody carbon fiber top plate x 1 2mm carbon fiber FPV Pod plate x 2 1.5mm motor neck stiffeners carbon fiber x 4 M3x5.5x30mm hex black aluminum standoffs x 3 M3x5.5x10mm hex black aluminum standoffs x 4 M3x8mm alloy screws x 4 M3x6mm alloy screws x 16 M3x16mm aluminum screws x 4 Nylon hex nut x 8 Power Distribution Board x 1 Battery Strap x 1 XT60 Male 3D printed skirt with your choice of color x 1 3D printed PDB cover with the same color as skirt x 1 Flexible VTX antenna mounting x 1 Flexible VTX mounting x 1
What else needed:
Flight Controller. Dodo suggested or any FC with built in power regulator. x 1 22xx motors x 4 Motors and right mounting screw length. M3x6mm length is suggested. x 16 ESCs. x 4 Rx radio x 1 Small FPV Camera. Cased HS1177 highly recommended. x 1 Pigtailed VTX x 1 5" propellers. x 4