The SkyRC D100 v2 is a two channel AC/DC charger which can charge a variety of battery chemistries (LiPo/LiHV/LiFe/Lilon/NiMH/NiCd/PB). Want to charge a 2S LiPo and a 6S LiHv pack at the same time? No problem, dual channels gives you the flexibility you need. The internal 100W power supply can even be used for external DC output up to 100W to power other equipment. If you have an external DC supply, the charger becomes even more powerful, allowing you to charge up to 200W (100W per port).
In addition to all of that flexibility, SkyRC proceeded to pack in as many features as they could, including some innovative new functionality. With its voice guide function, even a beginner can use this charger with confidence, as the charger talks you through the process. Another outstanding new feature is the "SCAN TO GO" function which allows the user to assign a QR Code which contains all the relevant data for your battery you are charging or discharging.
All you have to do is create a unique QR Code by using the “SkyCharger” app, print it, and paste it on the battery. Now all the essential information is stored in the QR Code and all you need to do is press the Scan button, and the charge or discharge process will start automatically! The app also allows you to remotely control and monitor the D100 v2. And for the information junkies, you can now monitor pack voltage, cell voltage and other data during the charging with real time graphs
Purposes to make the charger more user-friendly and customizable. A speaker supported English and Chinese separately have been included in the left side of the charger that can reduce the times for misoperation.
The charger supports power distribution between channel A / channel B and PSU under the total power of 100W in AC mode.
Scan To Go
A unique feature to make charger set easier. Allows the users to assign a QR Code which contains all the relevant data for the battery for charging or discharging.
The users can create a unique QR code by " SkyCharger " app. Print it and paste it into the battery. Using your smartphone and launch " SkyCharger "app. Since all the essential information is stored in the QR Code, you need to do is press the Scan button, and the charge or discharge process will start automatically.
DC Power Supply
The ability to supply 100W/13.8V DC power dramatically expands its usage scope, which is really an amazing partner for hobbyists to power the DC equipment.
SKYRC D100 V2 allows you to plug 2 batteries into one charger simultaneously, and it will intelligently and automatically charge 2 batteries at once.
The Bluetooth 4.0 connectivity allows the user to remote control and monitor the D100 V2 comfortably through an app on a portable device such as smartphone. Explicit pairing is not required; after APP download and installation just activate Bluetooth on your mobile device and launch the app. D100 V2 and your device will establish Bluetooth connection automatically.
The user can monitor pack voltage, cell voltage and other data during the charging, view charge data in real-time graphs, and can also control charging and update firmware from "Charge Master".
AC Input Voltage: 100 - 240V
DC Input Voltage: 11 - 18V
Charge Wattage: AC: 100W ( support power distribution ) / DC: 2 x 100W
Discharge Wattage: 2 x 10W
Charge Current: (0.1 - 10.0A ) x 2
Discharge Current: ( 0.1 - 2.0A ) x 2
DC Power Supply Output: 13.8V / max 100W
Current Drain for Balancing Port: 300mA/cell
Trickle Charging Current: 50 - 300mA and OFF
LiPo / LiFe / Lilon / LiHV Battery Cell Count: 1 - 6S
NiMH / NiCd Battery Cell Count: 1 - 15S
Pb Battery Voltage: 2 - 20V
Length ： 140mm
Width ： 153mm
Height ： 67mm
- SKYRC D100V2 AC DC Dual Balance Charger Discharger Power Supply US Plug (1 pc)
- AC Power Cord (1 pc)
- XH Adaptor (1 pc)
- Banana connectors with XT60 connector Charging Cable (1 pc)
- Charging Cable (1 pc)
- Instruction Manual (1 pc)