Input Voltage: DC 7-32V
Output Voltage: 0-30V
Charge Current: 0.1-14.0A
Discharge Current: 0.1-3.0A
Max Charge Capacity: 300W
Max Discharge Capacity: 8W
Balancing Current: 1A/cell
Balance Cells: 2-6S
Supported Batt. Type:
BattGO Support Smart Battery:Output support
Display: 2.4〃320×240 IPS LCD
Operating Temperature: 0-40°C
Storage Temperature: -20-60°C
Dimensions: 80x80x33.5 mm
This charger do not with power cable, you need to prepare by yourself.
Batteries pose a SEVERE risk of fire if not properly handled.
Read Entire operation manual before using charger.
This unit may emit heat during use.
Only operate this device in a cool ventilated area away from flammable objects.
Failure to observe safety procedures may cause damages to property or injury.
1x ISDT Q6 Pro BattGo Charger
Double up the power capacity, thinner, lighter
Brand new ISDT Q6 Plus with rounded edge design easily stows in bag or pocket. Same size as the SC-608 charger with twice the power capacity.
2.4″ IPS Display
up to 178° visible angle, auto-brightness screen, still visible under strong sunlight.
Highly optimized internal construction with higher cooling efficiency.
Higher speed and efficiency synchronous Digital Power Supply Technology.
High speed ball-bearing fan promotes active cooling increase by 300%, even though the size has been reduced by 50%.
Outstanding performance from every perspective
ARM 32bit high speed Processor
Instant boot (within seconds) when initialized
After the depth of optimizationscOs，Instant Boot, only a few seconds
One key shuttle control
One key metal shuttle control replaces the multi-button press operation, makes charging with the Q6+ a delightful experience.
scOsSpecially designed for smart charging OS
Bright, colorful, easy access set-up and status display. 80% deduction of operation process. Firmware updates can be performed using a personal computer.
3rd Generation Smart Balance Charger
Increased accuracy, with slight charging voltage adjustment capability.
Comes in a variety of languages to suit your needs.